Household AC220V Self-Resetting Over Voltage and Under Voltage Protection Relay

• Customization: Available
• Theory: Voltage Relay
• Usage: Car Relay, Household Appliances Relay, Communication Relay, Lathe Relay, Motor Protective
• Model NO.: ZHRV2-36G
• Phase: 1
• Load: Micro Power Relay
• Protective Characteristics: Enclosed Relay
• Action Principle: Electronic Type
• Size: Miniature
• Type: Electric Parameter Relay
• Rated Supply Frequency: 50/60Hz
• Rated Control Supply Voltage: AC220V
• Contact Configuration Capacity(a): 32A, 40A, 63A, 80A
• Reset Delay: 1s
• Power on Delay: 2s
• Under-Voltage Action Value: 175V
• Over-Voltage Action Value: 265V
• Under-Voltage Reset Value: 180V
• Over-Voltage Reset Value: 257V
• Transport Package: Stardard Packing
• Specification: 79.4*36*65.5mm
• Trademark: AKMAN
• Origin: Zhejiang China
• HS Code: 8536490000
• Production Capacity: 10000PCS/Week

Product Description

Applications
Used in home and villa single-phase control system,when the power supply is abnormal(voltage too high or too low),cut off the power to protect electrical equipment from damage.

Features:
Built-in microprocessor,true RMS measurement,voltage measurement accuracy ≤1%.Knob setting,LED indicator shows working status.Use(magnetic latching)relay to achieve products low-power.DIN-rail mounting.
 
Model Description
ZHRV2-36G panel description:
 Technical Parameters

Rated supply voltage	Ac220V
Rated supply frequency	50/60HZ
Contact Configuration capacity(A)	32A,40A,63A,80A Resistive
Maximum load power	7kVA(40A),13 kVA(63A),17 kVA(80A)
Over-voltage action value	265V
Over-voltage reset value	257V
under-voltage action value	175V
under-voltage reset value	180V
Action delay	0.1s
Power on delay	2s
Reset delay	1s
Voltage measurement error	≤1%
Delay error	±10%+0.1s
Knob setting accuracy	±1V
Rated insulation voltage	415V
IP Class	IP20
Class of pollution	3
Electrical Life	105
Mechanical life	106
Altitude	≤2000m
Allowable relative humidity	≤50%(40 oC)(No condensation)
DIN rail Standard	(width)35mm(IEC/EN60715)

 
Operating Instructions
1.Wire the protector according to the indicator IN and OUT directive.
2.When the protector is with normal supply voltage, yellow R/T indicator stays light on, relay implements output action; otherwise protector showsfaultwhile relay gets disconnected.
3.In case supply voltage goes over the set voltage operating value, yellow R/T indicator flickers and red U > indicator light-on. When fault time islonger than the set delay time, output relay gets disconnected, R/T indicator light-off. And if supply voltage is lower than undervoltage operating value, yellow R/T indicator flickers and red U< light-on. Also when fault time is longer than the set delay time, output relay gets disconnected, R/T indicator light-off.
4.When overvoltage fault protection is on and supply voltage is lower than overvoltage reset value, output relay actuates and R/T indicator light-on;
when overvoltage fault protection is on and supply voltage ishigher than undervoltage reset value, output relay actuates and R/T indicator light-on.
5.When supply voltage is lower than 150V, protector activates right away with no action delay;meanwhile,yellow R/T indicator light-off, red U< indicator light-on,and output relay gets disconnected.
6.Wiring terminal: N represents Zero Line, L represents Live wire, please do not mix up.
7.To avoid heating of contact from heavy current, please make sure the screw nail on the wiring terminal is tightened so as to prevent protector burning-up or other induced disaster.