Single DC AC Voltage Under Over Protection Relay

• Customization: Available
• Theory: Voltage Relay
• Usage: Car Relay, Household Appliances Relay, Communication Relay, Lathe Relay
• Model NO.: ZHRV5-01
• Phase: 1
• Electricity Type: AC/DC
• Number of Pole: 1
• Load: Micro Power Relay
• Protective Characteristics: Enclosed Relay
• Action Principle: Electronic Type
• Size: Miniature
• Type: Relay
• Rated Frequency: 45~65Hz
• Conventional Thermal Current: 8A
• Utilisation Category: AC-15, DC-13
• Trip Delay: 0.1~10s
• Rated Supply Voltage: DC12V, DC24V,AC220V , Ad240
• Contact Capacity: Ue/Le:250V/1.5A
• out Type: 1c/O
• Transport Package: Stardard Packing
• Specification: 91.4*18*66.2mm
• Trademark: AKMAN
• Origin: Zhejiang China
• HS Code: 8536490000
• Production Capacity: 10000PCS/Week

Product Description

ZHRV5-01 Operating Instructions ZHRV5-01
1.Select operating function selector knob ;the relay takes a reading of operating functions after power-on.In case of knob setting error, LED will fl-
   ash at the same time, which indicate the setting error. Normal operation will be resumed through resetting after power-off. If the operating function     is changed after power-on, all LED indicators would flash while the relay operates based on original operating functions;the LED would resume the     normal indication after the original setting is recovered.
2.Regulate the to set protection threshold value.
3.Regulate the h is 5%...20%of threshold value.
4.When measured volte exceeds the set threshold value of voltage,R/T LED would flash and the UE LED would go ON When fault time exceeds the     set time delay(0.1s...10s) interval,output relay would be disconnected and R/T LED would go OFF.
5.When "over-voltage, non-locking" mode is activated, if the operating voltage is less than the difference between voltage threshold value and lagged
   value the output relay would be actuated and the R T LED would go ON When "under-voltage, non-locking" mode is activated, if the operating
   voltage is more than the sum of voltage threshold value and lagged value, the output relay would be actuated and the R T LED would go ON
6.In case of "locking" mode, the operating voltage exceeds threshold value and output relay would keep an off-state. The power must be turned off       before resetting the relay.

Model Description

Model Selection Table

Model	Over-voltage	Under-voltage	Action delay	Rated supply voltage code	Rated supply voltage	Working voltage range	Setting range
ZHRV5-01	>U or <U selectable by knob		0.1s~10s	D12	DC 12V	DC7-20V	DC9V~15V
				AD48	AC/DC 24V~48V	AC/DC 15V~100V	AC/DC 20V~80V
				AD240	AC/DC 110V~240V	AC/DC 50V~270V	AC/DC 65V~260V
				A220	AC 220V	AC160V~270V	AC180V~260V

 
Technical Parameters

Measuring range	45Hz~65Hz
Adjustable hysteresis value	5~20%/5~20% of Threshold value
Action delay setting range	0.1s~10s
Voltage measurement error	≤1%(Entire setting range)
Delay error	±10%+0.1s
Knob setting accuracy	1%Scale value
Rated insulation voltage	460V
Contact configuration capacity(A)	8A
IP Class	IP20
Class of pollution	3
Electrical Life	105
Mechanical life	106
Altitude	≤2000m
Allowable relative humidity	≤50%(40ºC)( No condensation)
Use category	AC-15
Contact capacity	Ue/le:250V/1.5A
Output type	1C/O
DIN rail Standard	Width:35mm(IEC/EN60715)

 
Function diagram

Wiring Diagram                                                                              Dimensions(mm)