63A Voltage Relay Over voltage Protection Relay AC230V
Technical parameters:
| Rated supply voltage |
AC220V(AC230V) |
| Rated supply frequency |
50Hz/60Hz |
| Max.operational current |
40A/63A Resistive |
| Over voltage Hysteresis |
Over voltage operating value*(1-3%) |
| Under voltage Hysteresis |
Under voltage operating value*(1+3%)) |
| Measurement error |
≤1% |
| Delay error |
±10%+0.1s |
| Rated insulation voltage |
415V |
| Electrical durability |
100000 cycles |
| Mechanical durability |
1000000 cycles |
| Installation |
35mm DIN rail mounting |
| Parameters |
Setting range |
Step |
Factorydefault |
| Overvoltage |
Operation value |
OFF-225..275V |
1V |
265V |
| Delay time |
0.1.…10s |
0.1s |
0.1s |
| Undervoltage |
Operation value |
165V215V-OFF |
1V |
175V |
| Delay time |
0.1.10s |
0.1s |
0.1s |
| Start-reset delay time |
OFF-0.3.30s |
0.1s |
2s |
Panel Diagram
| LCD block code |
Block code interpretation |
| L1----N |
L1-N phase |
| NORMAL |
Normal indication,this block code flashes in case of start and reset delay |
| FAULT |
Fault indication, the relay contacts are disconnected |
| SET |
Menu setting indication |
| U> |
Over voltage fault indication or over voltage parameter setting indication |
| U< |
Under voltage fault indication or under voltage parameter setting indication |
Function diagram
Operating Instructions
1.Please connect input (IN), output (OUT), neutral wire (N) and live wire (L) correctly according to the product directive.
2.If the input voltage is normal, NORMAL light on , relay connect. Othersize,the protector displays the fault state and the relay remains disconnected.
3.If the input votlage is greater than over voltage operating value , >U light on.
If the input votlage is lower than under voltage operating value , <U light on.
If fault time is longer than the set delay time , relay disconnect , NORMAL light off , FAULT light on .
4.If over voltage fault protection is on and supply voltage is lower than over voltage reset value , relay will connect and NORMAL light on,
If over voltage fault protection is on and supply voltage is higher than under voltage reset value , relay will connect and NORMAL light on,
5.If supply voltage is lower than 120V, protector activates right away with no action delay , meanwhile , <U light on , and relay will disconnect .
6.To avoid heating of contact from heavy current , please make sure the screwnail on the wiring terminal is tightened so as to prevent protector burning up or other induced disaster .
Dimensions(mm)
Typical application
More Products
Q1.Are you a factory or trading company ?
A:We are a factory founded in 2010 and have over 10 years'OEM and international trading experience .
Q2.What's your main product?
A:Our main products are time Relay, voltage Relay, motor protector, current relay,solid state relay
Q3.Do you accept OEM or ODM?
A:Of course.
Q4.What's your main payment term?
A:T/T ,LC ,D/P.
Q5.Any quality guarantee or after-sales service?
A:All the products have 2 years' Guarantee. If any quality complaint , we will give out solution within 5 days
Q6.Can sample fee be returned back to me ?
A:Sample amount can be deducted from your bulk order payment when order quantity is over 1000 pieces at the first time.
Audited Supplier 
){kind=link}